Introduction
The 16/24 port Ethernet Switch are designed to allow simultaneous transmission of
multiple packets via an internal high-speed data channel .This means that it can partition a
network more efficiently than bridges or routers in most environments .This 16/24 port
Ethernet Switch is a highly reliable network Switch and is the ideal device for bridging
Ethernet to Fast Ethernet workgroups or networks .Simple and cost-effective, the 16/24 port
Switch Ethernet supports IEEE802.3 10Base-T Ethernet and IEEE802.3u 100Base-TX Fast
Ethernet. The 16/24 port Switch is therefore fast being recognized as one of the most
important building blocks for today networking technology.
The front panel of the 16/24 port Ethernet Switch provides LEDs for easy recognition of
the Switch operation status and for troubleshooting .These LEDs display the power status for
the system and link status speed ,collision ,full-duplex and receives status for each port.
With 16/24 port Ethernet Switch designed specifically for connecting workgroup devices
and desktops, companies no longer have to invest in expensive and inflexible switches
engineered primarily for backbone implementations. Instead, companies can deploy scaleable,
affordable Switch that increase the aggregate bandwidth of the network by boosting
throughput to the workgroups that need it most.
Features and Specifications
Features
—
Complies with the IEEE802.3 10Base-T Ethernet and IEEE802.3u 100Base-TX Fast
Ethernet standard
—
16/24 ports 10/100Mbps TX Auto-Negotiation Ethernet Switch
—
Full/Half-Duplex capability on every TX port
—
Supports TP interface Auto MDIX function for auto TX/RX swap
—
Automatic Source MAC Address Learning and Aging
—
Supports Store & Forward architecture and performs forwarding and filtering
—
Broadcast Storming Filter function
—
IEEE802.3x flow control for Full-duplex operation
—
Back Pressure function for Half-duplex operation
—
Runt and CRC Filtering eliminates erroneous packets to optimize the network
bandwidth
—
Support to handle up to 1522 bytes packet
—
LED indicators for simple diagnostics and management
—
Internal power supply
—
Plug and Play
Specifications
Standard:
—
IEEE802.3 10Base-T Ethernet
—
IEEE802.3u 100Base-TX Fast Ethernet
Network Media:
