PORT AND
SYSTEM STATUS
LEDS
The GEL2P-ESW26G switch includes a display panel for system
and port indications that simplify installation and network
troubleshooting. The LEDs, which are located on left hand side of
the front panel for easy viewing. Details are shown below and
described in the following tables.
Port Status LEDs
LED
Condition
Status
TP SPEED
Green/Yellow
Lit Green when TP link on 1000Mbps
Yellow when TP link on 10/100Mbps
PoE (Link/ACT)
Green
Lit Green when PoE link with PD and supply
power to PD
SFP SPEED
Green/Yellow
Lit Green when SFP link on 1000Mbps
Yellow when SFP link on 100Mbps
Mode Status LEDs
LED
Condition
Status
Link/ACT/Speed
Green
Lit Green indicates all LED of each port are in
Link/ACT/Speed mode.
System Status LED
SYSTEM LED
Condition
Status
Power
Green
OFF
Lit green when power is coming up
Off when Power is turn off
POWER SUPPLY
SOCKET
There are a power sockets on the rear panel of the switch. For
normal power supply, the GEL2P-ESW26G Switch has standard
power socket for AC power cord.
Revision A1
4
