DESCRIPTION OF
HARDWARE
1000BASE-T
PORTS
The switch contains 26 1000BASE-T RJ-45 ports. All RJ-45 ports
support automatic MDI/MDI-X operation, auto-negotiation and
IEEE 802.3x auto-negotiation of flow control, so the optimum
data rate and transmission can be selected automatically.
SFP
TRANSCEIVER
SLOTS
GEL2P-ESW26G supports the Small Form Factor Pluggable (SFP)
transceiver slots are shared with RJ-45 port 25 to 26. In the
default configuration, if an SFP transceiver (purchased
separately) is installed in a slot and has a valid link on the port,
the associated RJ-45 port is disabled.
The following table shows a list of transceiver types which have
been tested with the switch. For an updated list of vendors
supplying these transceivers, contact your local dealer. For
information on the recommended standards for fiber optic
cabling, see “
1000 Mbps Gigabit Ethernet Collision Domain
Supported SFP Transceivers
Media Standard
Fiber Diameter
(microns)
Wavelength (nm)
Maximum Distance*
1000BASE-SX
50/125
62.5/125
850
850
550 m
275 m
1000BASE-LX/
LHX/ XD/ZX
9/125
9/125
9/125
1310
1550
1300
10 km
30.50 km
10 km
1000BASE-LX
Single Fiber
N/A
TX-1310/RX-1550
Tx-1550/RX-1310
20 km
20 km
1000BASE-T
N/A
N/A
100 m
100-FX
50/125
62.5/125
850
1550
2 km
15km
N
OTE
:
* Maximum distance may vary for different SFP vendors
Revision A1
3
