13
Erbas Teknoloji - Reporter MX1144-DGR/B/H User Manual
7.
CONTROL OUTPUTS (RELAYS)
There are three ways to control your relay outputs remotely:
-
SMS
-
Call Trigger (MOD1)
-
Call & DTMF Dial (MOD2)
7.1.
SMS Method
Authorization
:
Admins and Users
Format
:
Password
<space>
RLYx:ON
(* where x is Relay nr)
Password
<space>
RLYx:OFF
(* where x is Relay nr)
Password
<space>
RLYALL:ON
Password
<space>
RLYALL:OFF
Password
<space>
RLYx:Period
(trigger in seconds)
Examples
:
1111 RLY1:ON
// turn on RLY1
1111 RLYALL:OFF
// turn off all relays
1111 RLY1:5
// turn on RLY1 for 5 sec. and then off
Responses
:
Process Succeed.
// format & pass is correct
Process Failed!
// format is wrong
Call Trigger Method (MOD1)
MOD1 is only used to trigger RLY1 in a predefined period (default: 2 seconds).
When you call device; it will reject the call after a few rings. Then it will Turn ON RLY1 for predefined
period and it will Turn OFF RLY1 after this period.
If this mode is selected MOD2 will be automatically disabled.
7.2.
Call & DTMF Dial Method (MOD2)
MOD2 is used to Turn ON & Turn OFF all available Relays individually via DTMF Call Dial Service.
When you call device; it will hang up and wait you dial Relay Nr and dial “ #/* ” for ON/OFF.
*** If your dials are not detected properly; please make sure you disabled VoLTE feature from your
mobile phone settings (usually under Cellular->Options->Voice&Data->VoLTE). If you still have
problems, please contact your GSM operator.
If this mode is selected MOD1 will be automatically disabled.
Timeout is 30 seconds after last dial. Device hangs up the call after this period.
Dial Format
:
RlyNr#
// turns on (activates) selected relay
RlyNr*
// turns off (deactivates) selected relay
Examples
:
1#
// turns on RLY1
1#2#3*4#
// turns on RLY1,2,4 and turns off RLY3
9#
// turns on all relays
9*
// turns off all relays
You will hear
two beeps
if your command is executed successfully.
