Page
2
of
3
4. Wait till the purge completes. The system is now ready to have cartridge replaced.
4.1 Lift up the cartridge Locking Handle as shown in the
picture.
4.2 Gently pull the used cartridge out of the system. Make
sure no old O-rings are left on the four ports of the
water system.
4.3 Take out the new cartridge; remove the four blue
protective caps on the cartridge nozzles. Make sure
each O-ring inside nozzles is firmly pushed in and
seated flat.
4.4 Install the cartridge onto the system with the
THIS END UP
arrow on the cartridge pointing up and all
four nozzles are firmly pushed in.
Note: Cartridge is directional. It must be installed
with the THIS SIDE UP arrow pointing up.
PURGE
PROGARD TL PACK
PLEASE WAIT…
CANCEL
PLEASE REMOVE
PROGARD TL PACK
CANCEL
