REPA LF3010293, Instruction Manual

Page: 11 / 116

11
With the buttons set the desired regeneration hours.
Press again the button and the second 2 digits of the display representing the regeneration minutes 02 - 00 will start
flashing.
With the buttons set the desired regeneration minutes.
Confirm with the button and wait 60 seconds until you hear the sound of the beep and it indicates the key pad is locked.
3) HOW TO SET REGENERATION FREQUENCY
Press the arrow buttons simultaneously and hold for 5 seconds. A beep sound will signal the unlocking of the keypad.
Press the button . A wrench symbol will light up on the keypad .
Press the button 3 times. The digits 1 - 03 will appear on the display.
Press the button . The two rightmost digits 1 - 03 will start flashing on the display.
Use one of the arrow buttons to change the interval by inputting how many days should pass between two
regeneration processes.
Press the button to confirm and wait for 60 seconds, until a beep sound signals the locking of the keypad.
The regeneration frequency has now been set.
NOTE
N.B: Note that the 2 rightmost digits might have already been changed with a previous setting.
NOTE
N.B: This means that a regeneration process will occur every 3 days.
warning
warning