REO REOTRON SMP CP 24-5, Instruction Manual

Page: 5 / 20

REOTRON SMP CP - CP/M
Instruction manual
5
2.0 Functions
Inputs:
Terminals
Set-point 1 Voltage set-point:
or power set-point:
0...10 V, DC, 0(4)...20 mA or Potentiometer 10 k
11(-), 13(+), 14(+10Vref.)
11(-), 12 (+) with 4...20 mA
Set-point 2 Current set-point:
0...10 V, DC, 0(4)...20 mA or Potentiometer 10 k
15(-), 17(+),
18(+10Vref.)
15(-), 16(+) with 4...20 mA
Inhibit
(SMP CP & CP/M
48-10 /-20 )
Contacts or 24 V, DC signal voltage
42(-), 43(+),
41 (-0Vref.), 44(+24Vref.)
Inhibit
(SMP CP & CP/M
24-5 )
Contacts or 24 V, DC signal voltage
42(+),
41 (
–ref.), 43 (+ref.)
Outputs:
Effective value 1
Effective output voltage 4…20 mA
31(-), 32(+)
Effective value 2
Effective output current 4…20 mA
33(-), 34(+)
Status relay
(SMP CP & CP/M
48-10 /-20 )
Status ON / OFF (output), change over contact 51, 52, 53
Inhibit (SMP CP & CP/M 48-10 /-20 ) :
Potential free input via optocoupler to terminals 42 and 43.
External contact across terminals 43 and 44 and a link between 41 and 42 or external 24 V, DC signal on
terminals 42(-) and 43(+).
Inhibit (SMP CP & CP/M 24-5 ) :
External contact across terminals 42 and 43 or external 24 V, DC signal on terminals 41(-) and 42(+).
Voltage regulation (set-point 1)
Link set-point 2 (current) to +10V reference (terminals 17 and 18).
Set-point power to 100% or nominal value. (Menu C 020, P. =100%)
Connect voltage set-point to terminals 11
– 14 (see connection diagram).
The current limit can be set in Menu “C. 020”.
Current regulation (set-point 2)
Link set-point 1 (voltage) to +10 V reference (terminals 13 und 14).
Set-point power to 100% or nominal value. (Menu C 020, P. =100%)
Connect current set-point to terminals 15
– 18 (see connection diagram).
The maximum output volt
age can be set in Menu “C. 020”.
Power regulation (set-point 1) Switching to power regulation: set in Menu C 003: E.F.P. = I
Link set-point 2 (current) to +10V reference (terminals 17 and 18).
Set-point voltage to 100% or nominal value. (Menu C 020, P. =100%)
Connect power set-point to terminals 11
– 14 (see connection diagram).
The current limit can be set in Menu “C. 020”.