Renu Electronics GWY-900, User Manual

Page: 26 / 46

Application Development in Flexisoft ®
26
4.1.1 GWY-9xx system tag information:
Tag Number High Byte Low Byte
SW0049 Mobile Number 2
nd
ASCII Digit Mobile Number 1
st
ASCII Digit
SW0050 Mobile Number 4 th ASCII Digit Mobile Number 3 rd ASCII Digit
SW0051 Mobile Number 6
th
ASCII Digit Mobile Number 5
th
ASCII Digit
SW0052 Mobile Number 8 th ASCII Digit Mobile Number 7 th ASCII Digit
SW0053 Mobile Number 10
th
ASCII Digit Mobile Number 9
th
ASCII Digit
SW0054 Mobile Number 12 th ASCII Digit Mobile Number 11 th ASCII Digit
SW0055 Mobile Number 14
th
ASCII Digit Mobile Number 13
th
ASCII Digit
SW0056 Mobile Number 16 th ASCII Digit Mobile Number 15 th ASCII Digit
SW0057 Mobile Number Length in decimal including ‘+’ sign & country code. **At power on, default
length will be 13 digits.
SW0058 Message Sending Progress Status. Value Details:
1= Message sending is in progress
2= Message sent
3= Message Sending Fail
4= Wrong Mobile number digit format
0= Default value.
User can write in this System register to clear it or it will be clear after switching to another
screen.
4.1.2 GWY-9xx System Coil Tag Information:
Tag Number
S00055
Network Coverage
0-SIM is not registered to network
1- SIM is registered to network
S00056 Received Message Ready Flag. It will become 1 when message received. It will be clear after
one main loop cycle.
Add tags of respective node of serial driver (Modbus RTU Master), of which information you want send to
remote place. Refer below given image: