6
1.1
Purpose of this Manual
The intention of this Operation Manual is to provide a guide for Safe
installation, Configuration and operation of Gateway series models.
This
manual is applicable to both models one which take power from External
Device connected (PLC, Controller etc.) itself through the Communication
cable (Gateway-PP) and another which takes power from external source
(Gateway-EP).
Read this operation manual thoroughly before installing and
operating Gateway.
This document is based on information available at the time of its publication.
While efforts have been made to be accurate, the information in this document
may not cover all the details or variations in hardware or software. Features
described herein may not be present in all hardwares. Renu Electronics reserves
the right to update information in this publication without prior notice.
1.2 Introduction
to
Gateway
Gateway Series protocol converters provide interface between different devices
having different or same communication protocol. Gateway communicates with
your PLCs / Inverters / Controllers using RS-232 or RS485 serial communication.
Ex24VDC supply is required for operating Gateway (Gateway-EP).
Another models take power from PLC on their PLC port (Gateway-PP).
Configuration of Gateway :
Each Gateway has to be configured using Windows based configuration
Software before connecting it to the PLC.