24
Configuration Software
Each Gateway has to be configured using Windows based configuration
Software before connecting it to the PLC.
Configuration includes.
1.
Create a new project
•
Select protocols both communication ports of gateway.
•
Create a blocks for data to be shared.
•
Set Communication Parameters.
•
Set Control Word.
•
Set Error Indication Bit, etc.
2. Downloading.
•
Download Project
•
Download new firmware if required (For upgradation )
•
Download new drivers (For different protocols)
If Devices to be connected to GATEWAY are specified while ordering,
Downloading firmware and drivers is not needed. Firmware & drivers are
already downloaded while shipment.
3. Upload
Project.
Existing project in the gateway module can be seen.
4.
Upload System Data.
This option enable user to see versions and status of firmware, drivers,
and boot block.
