Rentech SILVERBRIC Series, User Manual

Page: 14 / 40

All Right Reserved © SHENZHEN BAK POWER BATTERY CO., LTD
12
Integrated Lithium-ion Battery Pack
User Manual
2 ILLUSTRATION
RS485
RESET
When the system is in parallel mode, it uses the RS-485 serial port for data
transfer. The main system (Charger/Inverter controller or PC) connects through
the Master Pack to get the data for each Slave Pack. Connection as shown in
figure 2-4.
Figure 2-4 RS-485 connection schematic diagram
Press RST key for 3 seconds to start the device, or press the RST key for 3 seconds
again to shut down the device. When the system is running, should there be an
exception (alarm), press this button for 6 seconds to reset the system (press /
release) to ensure the stability of the system.