background image

7

2.4.0 POWER TOOL AND USE

1. Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it 
was designed.

2. Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and 
must be repaired.

3. Disconnect the plug from the power source and/or the battery packfrom the 
power tool before making any adjustments, changing accessories, or storing 
power tools.
Such preventive safety measures reduce the risk of starting the power tool 
accidentally.

4. Store idle power tools out of reach of children and do not allow persons 
unfamiliar with the power tool or these instructions to operate the power tool. 
Power tools are dangerous in the hands of untrained users.

5. Maintain power tools. 
Check for misalignements or binding of moving parts, breakage of parts and 
any other condition that may affect the power tool’s operation. If damaged, have 
the power tool repaired before the use. Many accidents are caused by poorly 
maintained
power tools.

6. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to 
bind and are easier to control.

7. Use the power tool, accessories and tool bits etc. in accordance with these 
instructions, taking into account the working conditions and the work to be 
performed.
Use the power tool for operations different from those intented could result in 
hazardous situation.

ATTENTION!

Have your power tool serviced by a qualified repair person using only
identical replacement parts.

Summary of Contents for RCM-10













Reviews: