background image

6

2.3.0 PERSONAL SAFETY

1. Stay alert, be careful and use the power tool with caution.
Do not use the power tool when you are tired or under the influence of alcohol 
or drugs. Losing concentration for a moment can cause serious personal injury.

2. Use personal protective equipment.
Always wear a safety glasses. Protective equipment such as a respirator, safety 
shoes, helmet and hearing protection used for appropriate conditions will 
reduce personal injuries.

3. Prevent unintentional starting. 
Make sure that the power switch is off position before connecting to power 
source and/or battery pack, picking up or carrying the tool. Carrying power tools 
with your finger on the switch or energising power tools that have the switch 
on invites accidents. Remove any adjusting key or wrench before turning the 
power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in 
personal injury.

4. Do not overreach.
Keep proper footing and balance at all times. This enables better control of the 
power tool in unexpected situations.

5. Dress properly. 
Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves 
away from moving parts. Loose clothes, jewellery or long hair can be caught in 
moving parts.

6. If device is provided with a connection for dust extraction and collection 
facilities, ensure that these are connected and properly used. 
Use of dust collection system can reduce dust-related hazards.

PERSONAL PROTECTIVE EQUIPMENT

Use protective gloves and clothing
Use sealed protective goggles
Use face/breathing protection
Use ear protection

Risk of crushing 
Risk of corrosion
High noise levels
Serious hearing damage

Summary of Contents for RCM-10













Reviews: