en
Fixscreen
®
Minimal - New construction IM 7
65
4.6 • Snap-fitting the side guiding channels in place
• Deep side guiding channel M.W or M.W+
Slide the intermediate profile
of the side guiding channel
into the fixed profile as
shown in the drawing.
Then snap the intermediate
profile into place by pushing
at the position where the
clips are visible.
Check to ensure that the
intermediate profile has
correctly snap-fitted into
place.
1
2
3
When clicking side guiding channels into place, make sure you do not damage
the fabric zip.
Slide the bottom of the base
plate of the freestanding
coupling side guiding
channel over the mounting
plate, either directly or
indirectly onto the underlying
construction or on the
mounting foot.
Use two screws M4x8 to fasten the
side guiding channel to the mounting
plate.
6
5
Summary of Contents for Fixscreen Minimal Neubau EW 7
Page 74: ...74 ...
