24
en
Fixscreen
®
100 Solar
9 • Maintenance
The system does not need much maintenance, but for years of enjoyment, we advise the
following:
• If the fabric becomes wet in a sudden storm, you can still roll it up and unroll it later to dry
when the weather is better. However, avoid having the wet fabric rolled up for more than three
days to prevent formation of mould and spots.
• Before cleaning, remove any loose dirt with a brush or vacuum cleaner. You can then use
a cleaning product (avoid caustic products) and warm water to remove the remaining dirt.
Always rinse the fabric after cleaning. Avoid cleaning in full sunlight: if soapy water dries
quickly, it can leave spots on the fabric.
• Make sure never to let snow accumulate on the solar panel, and that its photovoltaic cells are
not covered by snow, leaves, etc.
Do not use aggressive abrasives.
• Keep the photovoltaic cells clean by cleaning them with clean water, using a soft cloth to avoid
scratching them.
• If anodised or enamelled profiles become dirty, they can be cleaned with warm water and
a gentle-acting cleaning product. Never use aggressive products, abrasive sponges or other
abrasive media.We also advise against using high-pressure equipment.
• Swivelling or rotating parts should be lubricated annually. Use a dry lubricant for this (Veidec
Dry Lube (G6002790)).
• After cleaning (remove twigs and leaves), plastic sliding sleeves can be lubricated with a dry
lubricant (Veidec Dry Lube (G6002790)).
• Frequently control your product on twigs, leaves, bird nests, ets. and remove them.
Maintain the product “as a good keeper”.
• As the manufacturer, we recommend having a regular technical inspection by your installer:
Annually at public utility building and at your private home.
• Always use original parts from the manufacturer.
Important to know:
• The main connection should be made by a qualified electrician in accordance with applicable
standards.
• RENSON does not take the liability or gives the warranty on the automatic control system for
the motor screen, except the well-known systems of Somfy.
• RENSON can not guarantee that the communication protocol for automatic building control or
system for home automatisation is compatible with the protocol for controlling the motor screen.
• Minor colour variations may occur during the manufacturing process between the colour
guides and the profiles of the sunprotection screen. There may also be minor colour differences
between components and profiles.
• The fabric may exhibit slight colour nuances and imperfections.
• Creases/folds of fabric can occur and are not covered by the warranty.
• Over time, the colour of the fabric may fade slightly, depending on the chosen colour and
design.
• In the case of straight screens, where the fabric hangs down vertically because of the weight of
the bottom rail or a tensioning system, wrinkles can form in the fabric depending on the type of
screen
(See also our warranty certificate
*
)
* This information does not replace the warranty certificate.