16
en
Fixscreen
®
100 Solar
3 • Installation method 1
Side channel G
• Demount the 2-part side
channel.
• Use an Allen key type 3 for
unscrewing the front part of
the side channel type ‘G’.
• A plastic end cap at the
base of the side channel
type ‘G’ prevents the HPVC
side channel from sliding
down.
• This end cap can be
removed if the rail is resting
on a horizontal surface.
With the Fixscreen 100
Solar IM1, no connection to
the mains power supply is
required.
1
2
100
100
100
28
48
48
60
8
60
21,7
470
35
48
35
50
30
CF1
CF2
The closed type side channel is pre-drilled as standard (the inner chamber by Ø10 mm in all
cases). There are 2 placement options for the side channel:
sideways
or v
ia the rear wall
. The
Ø10 mm borehole is already pre-drilled; the ø5 mm borehole has yet to be drilled.
The holes are pre-drilled sequential over a distance of 250 mm.
Allow a maximum distance of 750 mm between sequential holes.
Fix the screws and make sure that the screw head is integrated (flush-mounted)
to prevent obstruction of the H-PVC inner rail.
3
Mounting of side channel
through the backside (ø5mm)
Mounting of side channel
sideways (ø5mm)
