67
Endura
®
Twist
en
Click the front profile (front) loose with the included auxiliary
tool. To do this, slide the tool from the bottom through the
insect-repellent PVC profile.
Then click the front profile securely back on.
Using the notch on the
auxiliary tool, support the
lower aluminium inner
profile.
Remove the protective
cardboard from the Endura
®
Twist.
Tilt the tool towards the window. The front profile now clicks
free. Hold the front profile securely while unclicking it, so that
it does not fall when it comes loose!
− For window depths > 170 mm:
Due to the deeper window frame, it is no longer possible to remove the protective cardboard
by means of the maintenance profile. The front profile must be removed with the aid of the
auxiliary tool supplied for this purpose.
➊
➋
➍
➌
➎
Summary of Contents for Endura Twist
Page 1: ...Endura Twist Montageanleitung Assembly instructions...
Page 90: ...90 Endura Twist...
Page 91: ...91 Endura Twist...
