EN
121
Select ‘RF Information’ with
▲
or
▼
and confirm with
■
.
The strength of the signal (RSSI) can be seen in green, preceded by
a number between 0 and 100 (0 = no signal, 100 = optimal signal).
The larger the number, the stronger the signal. The PER-value shows
the loss of data. The lower this value, the stronger the signal.
‘Clear’ lights up. Push on
■
to clear the signal strength. This can be
useful in order to check the strength of the signal. In order to do so
you should change the ventilation level in the main control menu and
return to ‘RF information’. The menu will now show the current values.
Push shortly and simultaneously on
▲
and
▼
to leave the menu.
RF information
With this menu you can check the signal strength of the wireless connection between the
TouchDisplay and the Endura
®
Twist. According to this information you can decide to set a
TouchDisplay as ‘RF Repeater’.
