manualshive.com logo in svg

Renovator twist-a-saw, Safety And Operating Manual, Page: 21 / 52

Share
Download
Renovator twist-a-saw Safety And Operating Manual Download Page 21

Twist-A-Saw

™

 Manual 

Page 19

Setting up 

Attaching the Multi-Purpose Handle

Always use the Multi-Purpose Handle when operating your Twist-A-Saw

™

 . 

Because Twist-A-Saw

™

 spins as it cuts it can ‘pull’ or ‘drift’ to the left . 

Operating the Twist-A-Saw

™

 with two hands combats this, giving you greater 

control and therefore greater accuracy when cutting .

Follow the steps below to attach the Multi-Purpose Handle to the  

Twist-A-Saw

™

 .

Warning!

It is extremely dangerous to use the Twist-A-Saw

™

 without the Multi-

Purpose Handle .

Part

Action

1

Loosen the collar locking knob (1) .

2

Slide the Multi-Purpose Handle collar (2) onto the bottom of 

the Twist-A-Saw

™

 (3) .

3

Align the key (4) on the motor housing with the keyway in 

the collar (5) .

4

When the key and keyway are aligned, slide the collar 

completely onto the Twist-A-Saw

™

 . 

Note: 

Push the Multi-Purpose Handle collar onto the  

Twist-A-Saw

™

 as far as it will go .

5

Lock the Multi-Purpose Handle collar onto the Twist-A-Saw

™

 

by tightening the collar locking knob .

6

To remove the Multi-Purpose Handle

, reverse this 

process .

Continued on next page…

Summary of Contents for twist-a-saw





















































Reviews:

No comments