1
Important Safety Instructions
Please save these instructions.
This manual contains important safety, and operating instructions for the Multimeter. The
following symbols are used throughout the manual to indicate potentially dangerous
conditions or important safety information.
WARNING
: Indicates a potentially dangerous condition. Use extreme caution when
performing this task.
CAUTION: Indicates a critical procedure for safe and proper operation of the Multimeter
NOTE:
Indicates a procedure or function that is important to the safe and proper operation
of the Multimeter.
To avoid possible electric shock, personal injury, or death, read the safety instruction before using
the meter.
Use the meter only as specified in this manual, or the protection provided by the
meter might be impaired or lost.
Inspect the meter before using it. Do
NOT
use the meter if it appears damaged.
Inspect the test leads before use. Do
NOT
use them if insulation is damaged or
metal is exposed.
Keep your fingers behind the finger guards when using the test leads.
Do
NOT
apply more than 500V voltage between meter terminal and earth ground,
preventing electric shock and meter damage.
Be cautious when the tested voltage is above 60VDC or 42Vrms AC. These
voltages pose a shock hazard.
Remove test leads from the meter before opening the case
NEVER
remove the cover or open the case of the meter without first removing it
from the main power source.
NEVER
use the meter with the cover removed or the case open.
Do
NOT
apply more than the rated voltage or current.
