08
Use bare wiring when connecting to the Wanderer’s terminal
blocks. Due to default positioning, you must ensure that the
terminal hatch is completely open before the first-time use.
1.Make sure to rotate the hatch counterclockwise (CCW) into
the open position to expose the wire hatch
3.Rotate clockwise (CW) to until the hatch has closed and
clamped onto the wire
2.Insert bare wire into the terminal for the respective connection
6 inches
warm air
(150mm)
cool air
6 inches
(150mm)
Wiring and Fusing
NOTE
The wire terminals are closed by default.
