Renogy MTS-TMB, Manual

Page: 2 / 14

2
Important Safety Instructions
Please save these instructions.
This manual contains important safety, installation, and operating instructions for the Renogy Tilt
Mount Brackets hardware system. The following symbols are used throughout the manual to
indicate potentially dangerous conditions or important safety information.
WARNING : Indicates a potentially dangerous condition. Use extreme caution when
performing this task.
CAUTION: Indicates a critical procedure for safe and proper operation of the system.
NOTE: Indicates a procedure or function that is important to the safe and proper operation
of the system.
General Safety Information
•
Read all of the instructions and cautions in the manual before beginning the installation.
•
Chance to strip nuts and bolts exists.
•
Do NOT substitute parts from other manufacturing sources, doing so may void the
warranty and/or result in an unstable system
•
This system does NOT possess any compliance with residential structural codes and
should not be used in place of a system that is, if required by local regulations
Installer Responsibilities
•
Installation compliance with any applicable codes which are in force at the installation site
•
Installation compliance and compatibility with all system components and the environment
including but not limited to roofing, system components, etc.
•
Verification that all project information is accurate
WARNING:
This equipment should be installed, adjusted, and serviced by qualified electrical
maintenance personnel familiar with the construction and operation of the equipment and the
hazards involved. Failure to observe this precaution may result in bodily injury. Protective gloves
and safety glasses should be worn during installation.