Point Source Array Modules
7
The modular point source nature of VARIA lends itself to building custom coverage patterns to match room geometries. In this
fashion, simple arrays such as the one shown below are straightforward. The MPS connector is the only connector needed and a
pair is provided with each loudspeaker.
Each connector includes four 1/4” shackle pick points that can used to directly connect suspension hardware to the array.
This ‘SHACKLE’ mode has some limitations
1. No more than 5 enclosures.
2. Subwoofers may not be included in the array.
3. No more than 150 lbs./68 kg. loaded on any one shackle point.
4. Connectors can only accept pull forces in plane with the steel. No rotations or outward bridles.
NOTE: The RHANG frame does not have these limitations.
For larger arrays and where rigging requirements include bridles or odd angles, the RHANG frame is required. When utilized prop-
erly, arrays of up to 2000 lb can be assembled with both the standard and WR versions.
RHANG—The RHANG frame connects directly to any of the VARIA enclosures
in the same manner as the other connectors, M8 bolts. Once connected, rigging
hardware can be used to connect to any of the eight, 15/16"/24 mm holes in the
frame. Using four pick points, the frame is rated to safely suspend arrays of up to
24 enclosures or a maximum of 2000 lb/907 kg.
Rear Pick Bar— In addition to the RHANG frame, for pull back conditions that
require bridles or larger rigging hardware than 1/4” shackles, the Rear Pick Bar is
used and simply bolts into the center hole on each connector. The Rear Pick Bar
connects with M8 x 25mm bolts provided. Note: the Rear Pick Bar is only compat-
ible with the MPS connector, not the M1 or M2.
Arrays illustrated
flown in shackle
mode without the
RHANG frame.
Array illustrated
flown with the
RHANG frame.
