Line Array User’s Manual
19
Splay angles can be set while the cabinets are on the ground. To set minimum splay angle, simply insert the quick-release
pin through the receiving tube and into the tie bar.
To set medium or maximum splay angle, two operators (one per side of the enclosure) should lift the top
enclosure until the proper holes on the tie bar and receiving pin are aligned. Then insert the quick-release pin.
Check to make sure that both sidesof the enclosure are set to the same play angle.
The RHANGSTLA fly bar will support arrays up to 12 deep. It provides a simple way to alter the array’s tilt
angle without requiring multiple rigging points and motors.
