MPSA Loudspeaker Systems
Page 3
Modular Point Source Line Arrays (continued)
Suited equally to fixed installation or portable applica-
tions the full range array cabinets offer consistent 90
o
horizontal and tight 15
o
vertical coverage. Individual array
cabinets can be stacked or arrayed with each cabinet
increasing the vertical coverage by 15
o
degrees. Up to
four full-range modules can be arrayed to provide a 90
o
by 60
o
coverage pattern,.
Floor Mounted Systems
Each array cabinet is provided with a multi-angle 35 mm
pole socket that allows the cabinet’s output to be aimed up or
down or straight ahead.
The matching CF/CFX15S subwoofers are provided with a
threaded pole socket to assure reliability. The length of the as-
sociated POLE-CF101 is easily adjustable.
To assemble the basic floor system shown here:
1.
Screw the mounting pole into the threaded pole socket on the
subwoofer.
2.
Place the array cabinet on top of the pole using the bottom
mounted tripod socket
3
Adjust the height and coverage angle as desired.
If a second array module is needed:
1.
Place the second module on top of the first module and align
the metal hardware channels.
2.
Remove the quick disconnect pins on the top array module
and use the knurled knobs on the joining bars to slide them down
into the channels on the lower cabinet. (See Step 2 below)
3.
Then lock the cabinets together by inserting the quick disconnect pins into the metal channels on
the lower cabinet. (See Step 3 below).
If two subwoofers are used follow the same procedure used for the array modules; set one on top of
the other, align, remove quick disconnect pins on the top subwoofer, slide the joining bars down and
lock in place with the quick disconnect pins.
Pole mounted arrays should be limited to two CF/CFX101LA mounted on either one or two subwoof-
ers.
Multi Angle Pole Socket
POLE-CF101 Pole
Floor System;
single array module and subwoofer
Step 3
Step 2
