background image

Introduction

Congratulations on your purchase of a Renkus-Heinz  CF/CFX101LA series point source line array 

loudspeaker system. Your CF/CFX series loudspeaker has been designed to provide you years of 

trouble-free high performance listening pleasure. We hope you enjoy it. 

Your CF/CFX101LA series loudspeaker was carefully tested and fully inspected before leaving our 

factory and should have arrived in perfect condition.  Please carefully inspect your loudspeaker and 

its shipping carton for any noticeable damage and if any damage is found, immediately notify the 

shipping company.  

Only the consignee may institute a claim with the carrier for any damage incurred during shipping.  Be 

sure to save the carton and all packing materials for the carrier’s inspection.

Table of Contents 

 

  Introduction  2

 

 

Modular Point Source Line Arrays , An Overview  

3

 

 

Ground Stacked & Pole Mounted Systems   

4

  Flying 

Arrays 

   5

  Subwoofer 

Assembly 

   5

  EASE 

Focus    6

  CXF101LA 

Connections 

  6

  CFX101LA-5 

Connections 

  7

 

 

CF101LA-5R & CF101LA-52R Connections  

8

  High 

Frequency 

Control 

Settings 

  9

 

 

CFX101LA & CFX15S DSP Settings 

 

10 

 

 

Technical Specifications 

 

 

12

Technical Support

If you run into any  problems or have any questions about these products, please call our 

technical support staff at +1 949 588 9997 and ask the operator for technical support 

Call Monday through Friday from 8:30 AM to 5:00 PM Pacific time.

MPSA Loudspeaker Systems

Page 2

Modular Point Source Line Arrays

Designed for power, portability and versatility, 

CF101LA and CFX101LA modular point source 

line array systems from Renkus-Heinz are the 

ideal solution for today’s small and mid-sized ven-

ues, including auditoriums, night clubs, theaters 

and houses of worship. 

Individual full range cabinets can be used as a 

stand-alone system, either with or without an 

associated subwoofer. They can be flown or pole 

mounted on a matching subwoofer or standard 

loudspeaker tripod stand. 

CF101LA/CFX101LA  Array Module

CF15S/CFX15S Subwoofer

Summary of Contents for CF101LA-5













Reviews: