27
Play a cassette
• Playing cassettes is possible in both decks (A and B).
• Press the key POWER (1) to switch on the device.
• Press the
/
STOP/EJ
button.
The cassette compartment (2) opens.
• Put a recorded Cassette with tape opening downwards in the drive.
• Close the drive.
• Select the Tape-input on your amplifier.
• If it is a CrO
2
-Cassette, press the button PLAY CrO
2
(11). When the button is activated agreen control LED flashes
on the display (4) above the button.
• Put the switch NOISE REDUCTION (3) into the correct position for this cassette.
The cassette was recorded with the hissing reject system > put switch to ON.
The cassette was recorded without the hissing reject system > put switch to OFF.
• Press the key
PLAY
.
• The playing starts.
• Press the button
PAUSE
to interrupt the replay shortly. To continue replay press button
PAUSE
again.
• Press the button
/
STOP/EJ
once, to stop the replay.
• Press the button
/
STOP/EJ
again, to remove the cassette.
The replay ends automatically when the tape ends.
Fast-forward and rewind
• Before you can forward or rewind the cassette, you must end the replay with the button
/
STOP/EJ.
• Press this key
FF
to forward the cassette.
• Press this key
REW
to rewind the cassette.
• Press the button
/
STOP/EJ
, to stop the forwarding or rewinding.
• On deck B you can check the tape position with the tape counter (5).
The forwarding and rewinding ends automatically, when the tape ends.
