• Make sure, that the power cable is not jammed, buckled, damaged by sharp edges
or mechanically stressed. Avoid excessive thermal stressing of the power cable
due to extreme heat or cold. Do not modify the power cable. Otherwise the power
cable can be damaged. A damaged power cable can lead to a fatal electric shock.
• Do not touch the power cable if it has been damaged. First disconnect the
associated power outlet from the power supply (e.g. with the respective fuse) and
then carefully pull the mains plug out of the power outlet. Never set the product
into operation if the power cable is damaged.
• To avoid any hazards a damaged power cable may only be replaced by the
manufacturer, a workshop authorized by the manufacturer or a similarly qualified
person.
• Never touch the mains plug with wet hands!
• Before connecting the product to the power supply, check whether the type of
current and supply voltage correspond with the details on the rating plate.
• The product gets hot during operation. Ensure adequate ventilation and never
cover the product during operation.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. Allow
the device to reach room temperature before connecting and using it. This may
take several hours.
•
Never spill liquids over electrical devices and never place objects filled with liquids
near the device. If liquid or an object enters the interior of the device nevertheless,
first power down the respective socket (e.g. switch off circuit breaker) and then
pull the mains plug from the mains socket. Do not operate the product anymore
afterwards, but take it to a specialist workshop.
• The use of electrical devices in schools, training facilities, hobby- and do-it-
yourself workshops must be supervised by trained personnel.
• In commercial facilities, observe all applicable accident prevention regulations for
electrical installations and operating equipment.
• Consult an expert when in doubt about operation, safety or connection of the
device.
•
Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operating elements
A3
A3
ENTER
A6
A6
A4
A4
BUSINESS
CARD
BUSINESS
CARD
READY
POWER
Off
80Mic
125Mic
1
2
3
4
5
6
1 Release switch
2 Power cable
3 Operating switch
4 POWER indicator lamp
5 READY indicator lamp
6 Input slot
Operating instructions
Laminator
Item no. 1486147 (RL-350)
Item no. 1486148 (RL-450)
Intended use
The product is used for the finishing or the protection of documents and photos with suitable
laminating pouches (not included in the scope of supply). It can hot laminate and is equipped
with an anti-film jam release switch. The operating state is indicated by two LEDs. The power is
supplied via a common household power outlet. The product is protected against overheating.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
•
Laminator
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Description of symbols
The symbol with a flash in a triangle indicates health risks e.g. due to electric shock.
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
The "arrow" symbol alerts the user to the presence of important tips and notes on
using the device.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• The power outlet must be situated close to the device and always be easily
accessible.
• Never use the supply line to pull the mains plug out of the power outlet. Always
pull it out of the mains power outlet with the gripping surfaces provided for this
purpose.
• If you do not use the product for a prolonged period, pull the mains plug out of
the power outlet.
• For reasons of safety, pull the mains plug out of the power outlet during a
thunderstorm.
