4 About this manual
Renkforce PL500D duo
1
About this manual
Carefully read all instructions before setting up the device and store the
manual and/or installation guide for later reference.
After a brief introduction to "PLC" basics and a presentation of the
PL500D duo in Chapter 2, Chapter 3 will cover successfully setting up your
PL500D duo. Chapter 4 explains how to configure your PLC network. Tips for
bandwidth optimization, information of environmental compatibility of the
device and our warranty conditions can be found in Chapter 5 and conclude
the manual.
1.1
Intended use
Use the adapter as described in these instructions to prevent damage and
injuries.
1.2
CE conformity
This product complies with the technical require-
ments of the EMC directive 2004/108/EC and the
other relevant provisions of the FTEG, and it is desi-
gned for use in the EU, Switzerland and Norway. The
product is class B equipment.
For the CE declaration for this product, refer to the accompanying product
CD.
1.3
Safety notes
It is essential to have read and understood all safety and operating instruc-
tions before the device is used for the first time; keep them safe for future
reference.
DANGER due to electricity
Users should never open devices. Opening the device poses a risk of electric
shock!
Users do not need to carry out any maintenance on devices. In the event of
damage, disconnect the device from the mains supply by pulling it or its plug
Summary of Contents for PL500D duo
Page 1: ...Renkforce PL500D duo...
