38
a) Set values for automatic function, switch alarm function on/off
• Push the button “ALARM”. The weather station is in the alarm display. The current alarm settings are displayed.
• Keep the button “SET” pushed for 3 seconds while the weather station is still in the alarm display.
• The hour setting for the time starts to flash; set it with the buttons “+” or “-”.
• Briefly push the “SET” button. The minutes of the time flash. Set them with the buttons “+” and “-”.
• Activate or deactivate the alarm function with the button “ALARM”. The alarm function is activated when the alarm
symbol
appears by the date/time display.
• Push the “SET” button. Use the buttons “+” or “-” to set the upper threshold for the indoor temperature.
• Activate or deactivate the alarm function with the button “ALARM” for the set range. The alarm function is activated
when the alarm symbol
next to the HIGH display for indoor temperature is lit. Push the button SET to save the value
and switch to the next setting.
• Repeat the settings for the following thresholds:
- lower threshold for indoor temperature
- upper threshold for indoor humidity
- lower threshold for indoor humidity
- upper threshold for outdoor temperature (channel 1)
- lower threshold for outdoor temperature (channel 1)
- upper dewpoint threshold (channel 1)
- lower dewpoint threshold (channel 1)
- upper threshold for outdoor humidity (channel 1)
- lower threshold for outdoor humidity (channel 1)
• Push the button “SET” after making the last setting. The weather station will return to normal mode.
A hysteresis of 0.5 °C was filed for the temperature alarm
Example:
When the upper set temperature threshold of 26.7 °C is reached, the acoustic and visual alarm signal
will be emitted. If the acoustic alarm signal is switched off with any button pressed, the visual alarm signal will
continue to flash until the temperature has dropped below 26.2 °C. Only then will the acoustic alarm be emitted
again if the upper temperature threshold of 26.7 °C is reached again.
For the humidity alarm, a hysteresis of 4% was stored
Example:
When the upper set humidity threshold of 60% is reached, the acoustic and visual alarm signal will be
emitted. If the acoustic alarm signal is switched off with any button pressed, the visual alarm signal will continue
to flash until the humidity has dropped below 56%. Only then will the acoustic alarm be emitted again if the upper
humidity threshold of 60% is reached again.
b) Display settings
Briefly press the button “ALARM” from the normal display. The set alarm settings are displayed. The weather station
switches back to normal mode after 30 seconds or press the button “ALARM”.
