34
c) Automatic Operation
• In the menu, select MODE and push the ENTER (7) button.
• Select the operating mode Auto Run with the UP (5) and DOWN (6) buttons.
• Push the ENTER button (7) to confirm your selection.
The device performs an automatically controlled light show in this operating mode.
d) Sound-to-Light Mode
• In the menu, select MODE and push the ENTER (7) button.
• Select the operating mode Sound Ctrl with the UP (5) and DOWN (6) buttons.
• Push the ENTER button (7) to confirm your selection.
• Select the menu item Soud Sensitive with the buttons UP (5) and DOWN (6) and push the button
ENTER (7).
• Set the microphone sensitivity with the buttons UP (5) or DOWN (6) and confirm your input with the button
ENTER (7).
The device is controlled via the installed microphone in time with the music in this mode.
The LED MIC (1) is activated in this operating mode.
Set the microphone sensitivity so that the light effect changes in time with the music.
e) Master-Slave Mode
• In the menu, select MODE and push the ENTER (7) button.
• Select the item M/S Choose with the UP (5) and DOWN (6) buttons.
• Select ON or OFF with the button ENTER (7):
ON = Master
OFF = Slave
If the device is to be operated as a single device (standalone), it must be defined as a master
device.
Only one device in a master-slave-chain must be defined as master device. All other devices
must be defined as slave devices.
