33
b) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the
controller. This DMX starting address specifies the first DMX channel to which the effect light responds.
The remaining control channels come after this first DMX channel (DMX starting address).
The effect light requires 13 free DMX channels.
Setting the DMX starting address
• In the menu, select ADDR and push the ENTER (7) button.
• Select the desired starting address 001-512 with the UP (5) and DOWN (6) buttons.
• Push the ENTER button (7) to confirm your selection.
Setting the DMX operating mode
• In the menu, select MODE and push the ENTER (7) button.
• Select the operating mode DMX Ctrl with the UP (5) and DOWN (6) buttons.
• Push the ENTER button (7) to confirm your selection.
The following table provides information about the effects of the settings on the individual DMX channels.
DMX channel
Value
Function
1
000-255
Rotating movement PAN
2
000-255
Swivel movement TILT
3
000-255
Overall brightness
4
000-255
Brightness red
5
000-255
Brightness green
6
000-255
Brightness blue
7
000-255
Brightness white
8
000-005
Strobe effect off
006-130
Strobe effect 1 slow > fast
131-135
Strobe effect off
136-255
Strobe effect 2 slow > fast
9
000-252
Speed PAN/TILT movement
253-255
Light is switched off during PAN or TILT movements
10
000-255
Fine setting PAN
11
000-255
Fine setting TILT
12
000-005
Macro operation off
006-130
Colour macro 1 slow > fast
131-255
Colour macro 2 slow > fast
13
000-253
no function
254-255
Reset
