puter. The USB port must be able to supply a current of 500 mA.
Connect the RJ45 port of the USB network adapter to your switch or router using a 1:1 con-
nected network cable.
It might be necessary to restart Windows before the USB network adapter functions properly.
Tips and Notes
• Connect the USB network adapter to a USB2.0 port on your computer, as a USB1.1 port
is too slow.
• If you have a network or system administrator who is responsible for your network (for ex-
ample in a larger company), allow him or her carry out the connection and driver installation;
do not install the USB network adapter yourself.
• The stated maximum data transfer rate of 10/100MBit will never be attained in practice.
This is due to the communication method used, transmission errors, other devices on the
network etc.
• With Windows, it might take some time until the PCs appear on the network.
When you turn on the computer, after a few seconds, when Windows is loaded on all com-
puters, you will be able to access all the other PCs immediately.
If, after a few minutes, it is still not possible to access other PCs, check any firewall and/or
virus scanner settings that may be used.
Naturally, the access permissions also have to be set accordingly, if you are using an oper-
ating system that offers such features.
Consult the applicable operating instructions, when using a network printer or other devices
in the network.
There are numerous causes explaining why a network connection is not successful. Please
refer to the appropriate specialist literature or to a specialist technician.
• If you are not using a DHCP Server (e.g. integrated in all DSL routers), you should assign a
static IP address to each device within the network.
For example, set the router to 192.168.1.1, set the first computer to 192.168.1.2, the second
computer to 192.168.1.3, and so on.
The first three digits must be the same on all computers; the last digit can range from 1 to
254.
The “subnet mask” has to be set to 255.255.255.0 for all the computers in the network.
Please keep in mind that an IP address (such as 192.168.1.1) can only be used once in the
network. When you set your router to the IP address 192.168.1.1, no other device in the
network can use this IP address!
•
Always ensure sufficient ventilation of the USB network adapter. It may heat up consider
-
ably during operation. Do not cover the USB network adapter.
• On the USB network adapter, there is a blue LED for function display:
The LED on:
Network connection in place
LED flashes:
Data transmission
LED off:
No network connection
Care and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions, as these may damage the surface or impair the functioning of the
device.
• Disconnect the product from the computer.
• Use a dry, lint-free cloth to clean the product. Do not allow water to get inside the product.
• To prevent scratch marks, do not press too strongly on the surface when cleaning.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ................................ via USB
Power consumption ...................... max. 166 mA
USB standard ............................... USB2.0 (USB1.1/USB3.0 compatible)
Bandwidth ..................................... 10/100 Mbit
Cable length ................................. approx. 55 mm
Dimensions (L x W x H) ................ 57 x 20 x 14 mm
Weight .......................................... 19 g
Small variations in dimensions and weight are due to the production technique.
Operating Instructions
USB 10/100 network adapter
Item No. 2435399
Intended use
The product is designed to be connected to the USB2.0 port of a computer and it is intended to
serve as a network port (10/100MBit).
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in or other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating
instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• USB network adapter
• Data carrier with driver
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per
-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a)
General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dan-
gerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of
the appliance.
•
Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
Driver Installation, Connection
Do not connect the USB network adapter to the computer yet. First install the re-
quired driver.
Insert the supplied data carrier into the respective drive of your computer.
If the installation program does not start automatically, open the CD main directory and start the
“autorun.exe” program. Follow all the instructions in Windows.
Depending on the Windows version, administrator rights might be necessary to in-
stall the drivers.
After the driver installation, connect the USB network adapter to a USB2.0 port on the com-
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights includ-
ing translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in electronic data pro
-
cessing systems) requires prior written approval from the publisher. Reprinting, also in part, is prohibited. This publication
reflects the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
2435399_v1_0821_02_dm_mh_EN
