Multimedia : Click “Multimedia” to set multimedia functions for specific keys.
Delete entry: If you want to delete all the , , and settings, click . To delete individual settings
in , , or , click “Delete”.
c) Backlight
Fn+M1: White backlight on all keys
Fn+M2: flashing backlight
Fn+M3: Backlight of individual keys
d) Functions of the multifunction controller
5a)
5b)
5c)
5d)
5e)
5g)
5f)
5h)
5a) Up and down
5b) Left and right
5c) Brightness adjustment
5d) Brush size
5e) Volume control
5f) Mouse wheel
5g) Back and forth
5h) Zoom in and out
• You can activate the function settings of the multifunction controller by pressing the middle key of the
multifunction controller for one second or by clicking the middle key of the multifunction controller on the
user interface (these settings can only be activated after the driver has been installed). The user interface
is displayed in the lower right corner and can be moved using the mouse by clicking in the middle of the
user interface and dragging it. You can select the functions by turning the multifunction controller or clicking
with the mouse.
• After selecting the function by turning the multifunction controller, press the middle key of the multifunction
controller, or press “enter” on the keyboard to confirm your selection (no further action is required when
selecting a function using the mouse). Press the middle key again to re-select the function.
Care and cleaning
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the
housing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At
the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to environmental protection.
Technical data
Power supply ........................................via USB-C
TM
port, 5 V/DC 500 mA
Cable length .........................................approx. 1.4 m
Supported operating systems ...............Windows 7/8/10 / MAC OS version 10.12 and higher
Operating conditions .............................0 – +55 °C, 10 – 85% relative humidity
Storage conditions ................................0 – +55 °C, 10 – 85% relative humidity
Dimensions (W x H x D) .......................169 x 32 x 152 mm
Weight ..................................................0.33 kg
Click “Apply” to activate the setting. In any mode, click “Delete” to delete the respective key
assignment and “Default” to restore the default settings.
Key assignment
: adjustable keys: G1-G9, “delete”, S, /, Z, X, C, V. If you press the desired key on
the on-screen keyboard, the settings window will be displayed. Enter the keyboard shortcut(s) of the action
to be assigned to the key. Then confirm your entry with “OK” . You can now set the next key.
The key settings allow you to set the “Single key” , “Micro setting” , “Multimedia” or “Combo keys”
. Click or Fn+Ctrl to activate the virtual keyboard. If you click any key on the virtual keyboard, an
empty field will be displayed to make entries. “Combo keys” : Click “Clear” and enter the keys
you need if you want to change the combination. In addition, you can also click to add the key setting to
the mouse function.
“Micro setting” : Click “Record” and add an action in the window. Click “+” or “-” to add or delete
a new action. You can perform these actions by pressing a single key without having to enter the complete
instructions. “Record delay” and “Record cycles” can be set. More practical and interesting functions are
waiting to be explored by you.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1629368_v1_1118_02_orf_m_en
