background image

Getting Started

  Two extra screws (1 long / 1 short) are included as spares. Keep these in a safe location.

• 

Step 1-5: Use the long screws 

(1)

.

• 

Step 6-7: Use the short screws 

(8)

  Do not overtighten screws 

(1)

 

(8)

 and mounting posts 

(3)

 

(5)

 as this may cause damage. The 

rubber base pad 

(9)

 can leave marks on sensitive surfaces. 

1

2

3

4

5

6

7

8

Care and Cleaning

•  Remove the device from the stand before each cleaning. 
•  Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause 

damage to the product.

• 

Clean the product with a dry, fibre-free cloth.

Disposal

 

At the end of its service life, dispose of the product in accordance with applicable regulatory 

guidelines.

 

You thus fulfill your statutory obligations and contribute to the protection of the environment.

Technical Data

Material ................................................. AS (acrylonitrile-styrene copolymer)

Operating / storage conditions

 .............. 0 to +40 °C, 10 – 90 % relative humidity

Dimensions (Ø x H) .............................. 140 x 159 mm
Weight .................................................. 262 g

 Operating Instructions

Stand for Amazon Echo

Item No. 1620630 

Intended Use

This stand comes equipped with rubber pads to absorb vibrations from the speaker, prevent slipping and 

protect sensitive surfaces against getting scratched. The wide base also helps prevent the device from 

tipping over. An open design offers clear access to ports and controls without blocking the microphone and 

sound from the speakers.

For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product 

for purposes other than those described above, the product may be damaged. In addition, improper use 

can result in short circuits, fires, electric shocks or other hazards. Read the instructions carefully and store 

them in a safe place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements.
All company names and product names are trademarks of their respective owners. All rights reserved.

Delivery Content

•  Stand
•  5 x long screws (1x spare)
•  5 x short screws (1x spare)
•  Cross-head screwdriver
• 

Operating instructions

Up-to-date Operating Instructions    

       

Download the latest operating instructions at www.conrad.com/downloads or scan the 

QR code shown. Follow the instructions on the website.

Explanation of Symbols

  The symbol with the exclamation mark in the triangle is used to indicate important information in 

these operating instructions. Always read this information carefully.

  The arrow symbol indicates special information and advice on operation.

Safety Instructions

Read the operating instructions carefully and especially observe the safety information. 

If you do not follow the safety instructions and information on proper handling in this 

manual, we assume no liability for any resulting personal injury or damage to property. 

Such cases will invalidate the warranty/guarantee.

•  The device is not a toy. Keep it out of the reach of children and pets.
•  Do not leave packaging material lying around carelessly. This may become dangerous playing 

material for children.

• 

Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high humidity, 

moisture, flammable gases, steam and solvents.

•  Do not place the product under any mechanical stress.
• 

If it is no longer possible to operate the product safely, take it out of operation and protect it 

from any accidental use. Safe operation can no longer be guaranteed if the product:

 - is visibly damaged,
 - is no longer working properly,
 - has been stored for extended periods in poor ambient conditions or
 -

has been subjected to any serious transport-related stresses.

•  Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage 

the product.

•  Consult an expert when in doubt about the operation, safety or connection of the appliance.
• 

Maintenance,  modifications  and  repairs  must  only  be  completed  by  a  technician  or  an 

authorised repair centre.

• 

If you have questions which remain unanswered by these operating instructions, contact our 

technical support service or other technical personnel.

Operating Elements

1
2

3

4

5
6

7

8

9

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights 

including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data 

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication 

represent the technical status at the time of printing.

Copyright 2018 by Conrad Electronic SE. 

  

*1620630_v1_0118_02_fl01_m(1)_4L

1  Short screws
2  Top plate
3  Mounting posts (long)
4  Mid-plate
5  Mounting posts (short)
6  Base plate
7  Rubber device pad
8  Long screws
9  Rubber base pad

Reviews: