To return to the main level in the menu, push the button MENU (3).
The installed controller needs approx. two seconds to accept and implement the set-
tings.
If no button has been pushed for 10 seconds, the display (1) will switch off automati-
cally. To reactivate it, push any button.
Once a DMX signal is recognised at the DMX IN input (8), the device will automatically
switch to DMX or slave mode. If no DMX signal is recognised anymore, the device will
automatically return to the previous operating mode.
Menu overview:
Display Setting
Function
Addr
A001-A512
DMX starting address
CHnd
3CH / 5CH / 7CH Number of DMX channels
SLAU
NO / YES
Slave mode no/yes
SOUn
Sd-1 / Sd-2 / Sd-3 Sound-to-Light mode 1 / 2 / 3 (3 different effects)
SP-1 to SP-8
Sound-to-Light (microphone sensitivity low > high)
JUNP
JU01 to JU20
Colour change operation
(change speed slow > fast)
FL-0 to FL-4
Colour change operation
(strobe speed slow > fast)
FAdE
Fd01 to Fd15
Fade operation (colour change slow > fast)
AUtO
Automatic mode with changing effects
COLO
C001 to C255
Static colours
FL00 to FL15
Static colours (strobe speed slow > fast)
NAnU
r000-r255
Manual colour setting
Brightness red off > full brightness
G000-G255
Manual colour setting
Brightness green off > full brightness
b000-b255
Manual colour setting
Brightness blue off > full brightness
bLnd
NO / YES
Blackout Mode no/yes
dISP
NO / YES
Display alignment turned 0°/180°
38