Renkforce 1413291, Operating Instructions Manual

Page: 32 / 74

32
Setting the DMX starting address
• Push the button FUNC (5) until "Addr" is displayed and push the button ENTER (8).
• Select the desired starting address 001-512 with the UP (7) and DOWN (6) buttons.
• Push the ENTER button (8) to confirm your selection.
The following tables provide information about the effects of the settings on the individual DMX channels.
1-channel DMX operation
DMX channel Value Function Comment
1 000-009 Lights off
010-039 Sound-to-light operation, all effects
alternatingly
when no sound is present > slow
automatic mode
040-079 Sound-to-light mode, effect 1
080-119 Sound-to-light mode, effect 2
120-159 Sound-to-light mode, effect 3
160-199 Sound-to-light mode, effect 4
200-255 Sound-to-light mode, effect 5
7-channel DMX operation
DMX channel Value Function Comment
1 000 Lights off
001-199 Brightness setting all colours dark >
bright
CH2, CH3, CH4, CH5, CH6 > 000
200-247 Strobe effect slow > fast
248-255 All colours full brightness
2 000-255 Brightness setting red dark > bright
CH1 > 000
3 000-255 Brightness setting green dark > bright
4 000-255 Brightness setting blue dark > bright
5 000-255 Brightness setting amber dark > bright
6 000-255 Brightness setting UV dark > bright
7 000-009 Motor off
010-255 Motor speed slow > fast
c) Display of the Software Version
• Push the button FUNC (5) until "Uer" is displayed and push the button ENTER (8).
• The display (3) shows the software version.