27
e) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the
controller. This DMX starting address specifies the first DMX channel to which the effect light responds.
The remaining control channels come after this first DMX channel (DMX starting address).
The effect light requires 3 or 6 free DMX channels depending on DMX operating mode.
Setting the DMX operating mode
• Set >> 6 ch in menu ChNd to operate the device in 6-channel DMX operation.
• Set >> 3 ch in menu ChNd to operate the device in 3-channel DMX operation.
Setting the DMX starting address
• Push the button FUNC until Addr is displayed and push the button ENTER.
• Select the desired starting address 001-507 with the UP and DOWN buttons.
• Confirm your selection again with ENTER.
The following tables provide information about the effects of the settings on the individual DMX channels.
6-channel DMX operation
DMX channel
Value
Function
1
000
Light off
001-255
Overall brightness
2
000-015
Automatic operation off
016-255
Automatic operation slow > fast
3
000-127
Flashing effect off
128-255
Flash effect slow > fast
4
000-255
Brightness red
5
000-255
Brightness green
6
000-255
Brightness blue
3-channel DMX operation
DMX channel
Value
Function
1
000-255
Brightness red
2
000-255
Brightness green
3
000-255
Brightness blue