25
Symbol
Option
Function
Addr
001-507
Setting the DMX starting address
VEr
db20
Display of the software version
Led
on
Display permanently on
oFF
Display switches on only after pushing a button
SLNd
NASt
Operation as a master device
SLAv
Operation as a slave device
ShNd
SoUn
Sound-to-light mode
CoLo
Automatic operation with colour effects
SPee
Speed setting for automatic operation
dISP
dISP
Display aligned normally
dSIP
Display alignment turned by 180°
ChNd
6Ch
6-channel DMX operation
3Ch
3-channel DMX operation
b) Master-Slave Mode
• Set the menu NASt to define the device as a master (control via the installed controller).
• Set the menu SLAv to define the device as a slave (control via the controller of the connected master
device).
If the device is to be operated as a single device (stand alone), it must be defined as a master
device.
Only one device in a master-slave-chain must be defined as master device. All other devices
must be defined as slave devices.
c) Sound-to-Light Mode
• Set SoUn in the menu to operate the device in sound-to-light operation.
• The effect light is controlled via an installed microphone in time with the music.