Operating instructions
Flexible water hose
Item no. 1275343 (5 to 15 m)
Item no. 1275356 (10 to 30 m)
Intended use
This product is suitable for connection to a common household water supply and is
intended for watering yards. The hose extends to 3 times of its length under water
pressure and shrinks back to its original length within a few seconds after use. The
spray head features 7 different functions.
For safety and approval purposes, you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product
may be damaged. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Water hose
• Spray head
• 19 mm (3/4“) hose connector
• 12.7 mm (1/2“) thread adapter
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• The hose has been designed for common household pressure only and
can be damaged if used with excessive water pressure. It is imperative to
observe the specifications provided under Technical data.
• Do not use this hose with hot water.
• Protect the hose from sharp edges.
• Do not drive over the hose riding a car, motorbike, bicycle, wheelbarrow,
etc.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operating elements
1
11
2
10
4
3
7
5
9
6
8
7
1 Adjusting ring
2 Spray head
3 Handle
4 Spray head connector
5 Trigger
6 Hose
7 Mounting for hose connector or spray head
8 Thread adapter
9 Hose connector
10 Adjusting screw
11 Locking lever
Operation
• Attach the spray head (2) to one of the two mountings (7) until it clicks into place.
• Attach the hose connector (9) to the other mounting until it clicks into place.
Both mountings are of same size. For that reason it does not matter to which
mounting you attach the spray head or hose connector.
• If necessary, screw the thread adapter (8) into the hose connector.
• Connect the hose connector to a suitable water tap.
• Open the water tap.
• Press the trigger (5) towards the handle (3) in order to let water emit from the spray
head.
• Turn the adjusting ring (1) in order to switch between the 7 functions of the spray
head.
-
MIST
-
JET
-
SHOWER
-
FLAT
-
CENTER
-
CONE
-
FULL
• Control the force of the water jet by turning the adjusting ring (10).
