Operating instructions
Indoor fountain with LED light
Item no. 1233679
Intended use
This fountain is designed to decorate indoor areas. The pump transports water
upwards from a container at the bottom via a riser tube. The pressure of the flowing
water causes a crystal ball on the top to rotate. An LED unit lights up the fountain
with constantly changing colours. The surrounding air is humidified as the water
evaporates.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Indoor fountain with LED light
• Pump with power adapter
• Decorative stones
• Crystal ball
• Operating instructions
Meaning of symbols
The symbol with the lightning in the triangle is used if there is a risk to your
health, e.g. due to an electric shock.
The exclamation mark indicates specific risks associated with handling,
function and use.
The "arrow" symbol indicates special tips and operating information.
The product must only be installed and used in dry, enclosed indoor
areas. The product must not become damp or wet as this creates the risk
of a fatal electric shock!
This symbol indicates that this product is built according to protection
class II. It is equipped with reinforced or dual insulation between the
mains circuit and the output voltage.
The device was constructed according to protection class III. Protection
class III includes electrical devices with a low voltage power supply (<
50 Volts) using a safety transformer or batteries/rechargeable batteries/
solar energy etc. Devices in protection class III have no connection for
protective insulation - they must not be connected to the protective earth.
Short-circuit proof safety transformer in accordance with EN61558-2-6 /
EN61558-2-17.
This symbol reminds you to read the operating instructions included with
the product.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
• The pump is built according to protection class III and IPX8.
• The mains plug must not get wet or damp. When placing the fountain,
ensure that the water does not flow along the power cable towards the
mains plug. The power cable must form a drip loop. There is a risk of a
fatal electric shock!
• The pump must only be connected to and operated on a mains plug which
is connected via an upstream residual current circuit breaker with a
maximum trip current of 30 mA.
• The product must only be used in enclosed indoor areas. It is not suitable
for outdoor use.
• The mains socket that the power adapter is plugged into must be easily
accessible.
• As power supply, only use the supplied mains adapter.
• Only connect the power adapter to a normal mains socket connected to
the public supply. Before plugging in the power adapter, check whether
the voltage stated on the power adapter complies with the voltage of your
electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the
cable; always use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched,
kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled
in them. This poses a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket
during storms.
• The power adapter is constructed with protection class II. Only a proper
mains socket (230 V/AC, 50 Hz) of the public supply net must be used as
voltage source.
• Before connecting to the mains, make sure that your local AC mains
voltage matches the specifications on the nameplate.
• If the wall plug transformer is damaged, do not touch it; there is danger
to life from electric shock! First, switch off the mains voltage to the mains
socket to which the wall plug transformer is connected (switch off at the
corresponding circuit breaker or remove the safety fuse, then switch off
at the corresponding RCD protective switch, so that all poles of the mains
socket are disconnected). You can then unplug the wall plug transformer
from the mains socket. Dispose of the faulty wall plug transformer in an
environmentally friendly way; do not use it any more. Replace it with a wall
plug transformer of the same design.
• Only operate the pump when it is fully submerged under water. The pump
is not designed to be run dry. This will quickly destroy the pump and
invalidate the guarantee/warranty.
• Only use clear water for the pumped liquid (tempe5.....+35 °C).
Never use other liquids (e.g. salt water, petrol, heating oil, chemicals,
solvents or food).
• Always pay attention to the markings for the minimum and maximum
water level.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.