Renkforce 1210387 Operating Instructions Manual Download Page 4

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). 
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data 

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent 

the technical status at the time of printing.  
© Copyright 2014 by Conrad Electronic SE. 

First time use, operation

  Please read and note the chapter “Safety Instructions”. 

•   Plug the protective contact mains plug of the power strip into a proper protective 

contact power socket (wall socket). 

•   Place the power strip at a suitable point. Route the cable in such a way that it does 

not present any trip hazards. Protect the valuable surfaces against scratches with 

padding. 

•   Connect the consumer to the plugs of the power strip. 
•   The plugs are switched on or off via large, red on / off switches (“I“ = on, “O“ = off). 

   A control light in the on / off switch is activated in the activated state.

Maintenance and care

•  This product does not require maintenance. There are no components located in-

side  the  product  you  need  to  maintain.  Never  open/dismantle  the  product.  Have 

maintenance and repairs done by qualified experts or repair shops only. 

•  Disconnect the power strip from the power supply before cleaning. Pull out the pro-

tective contact plug from the power socket (wall power socket). Then disconnect all 

connected devices from the power strip.

•  To clean the product, a dry, soft and clean cloth is sufficient. 
•  You can use a long-haired, soft and clean brush and a vacuum cleaner to remove 

dust. 

   Do not use any aggressive cleaning agents, rubbing alcohol or other chemi-

cal solutions as they can cause damage to the housing and malfunctioning. 

Disposal

   At the end of its service life, dispose of the product in accordance with ap-

plicable regulatory guidelines. 

 

Technical data

Connection data ................................. 230 V/AC 50Hz
Total installed power ......................... max. 3680 W
Protection type ................................... IP20
Protective contact plugs................... 3, with integrated child protection
Euro plug.............................................. 6, with integrated child protection
On / off switch..................................... 2 pole (N/L)
Cable type............................................ H05VV-F, 3 x 1.5 mm²
Ambient conditions ............................  Temperature  -20  °C  to  +40  °C,  humidity  15%  to 

75%, non-condensing

Cable length ........................................ 1.5 m
Measurements ................................... 170 x 115 x 40 mm (L x B x H)
Weight .................................................. approx. 330 g (incl. cable)

Reviews: