Still exercise caution when using the product in the vicinity of children.
Children cannot recognize the hazards posed by improperly using the de-
vice. This poses a risk of fatal electric shock!
This product is not a toy, keep it out of the reach of children. Install the
product in such a way that children cannot reach it.
• Do not leave packaging materials lying about, they may become a danger-
ous plaything in the hands of children.
• Handle the product with care; impacts, blows or falling from even low
heights can cause damage.
b) Setup location
• The product may only be operated in dry, closed indoor spaces only. It
must not get damp or wet! Never place the product near a bathroom,
shower or bathtub. This poses a risk of fatal electric shock!
• Protect the product from extreme temperatures, direct sunlight or strong
vibrations.
• Fully unroll the power cable during use. The power cable may not be
squashed or damaged on sharp edges. Do not place any objects on the
cable and do not step on the cable. Lay the cable so that no one can ac-
cidentally trip over it and so that the plug is easily accessible. Do not lay
the cable under rugs, etc.
• Use in spaces with a great amount of dust, with flammable gases, vapors
or solvents is not permitted. There is a danger of fire and explosion!
c) Use and operation
• Never touch, use, plug in or unplug the product with moist or wet hands.
This poses a risk of fatal electric shock!
• Never connect the product to the mains directly after moving it from a cold
to a warm room (i.e. during transportation). This may cause condensation,
which can destroy the device or lead to electric shock. Let the product
first reach room temperature. Wait until all condensation has evaporated
– this may take up to several hours. Only now may the product be con-
nected to the power supply and operated.
• Only unplug a power plug by pulling on the grips provided. Never pull on
the power cable to unplug the device.
• Do not overload the power strip. Heed the power rating in the chapter
“Technical data”.
• Do not plug behind each other. This may overload the power strip. This
poses a fire hazard!
Connect the power strip’s safety plug directly to a wall socket. Do not con-
nect any more power strips to the product.
• Do not operate covered! The higher the connected load, the more the
power strip and power cable will warm up, which can cause overheating
and possibly a fire if the product is covered.
• Zero potential only if plug is disconnected!
• Do use the product if it is damaged (e.g. casing, power cable, timer). This
poses a risk of fatal electric shock!
If damaged, dispose of the product in an environmentally friendly manner.
Safe operation is no longer guaranteed when:
- the product shows obvious damage
- the product does not function properly or at all (emitting smoke or burnt
smell, audible cracking noise, discoloration of the product or adjacent
surfaces)
- the product has been stored under adverse conditions
- if the product was damaged during transport.
• Only use the product in temperate climates. Do not use in the tropics.
• Always pull the power plug out of the power socket before cleaning the
power strip or when not using it for a long period.
• Never pour liquids above or near the product. This poses a great risk of
fire or fatal injury due to electric shock.
Should any liquid enter the device interior, turn off the power socket to
which the power strip is connected entirely (fuse/automatic circuit break-
er/residual current-operated device). Now unplug the power strip and
contact a professional. Discontinue use of the product.
• For installations in industrial facilities, follow the accident prevention reg-
ulations for electrical systems and equipment of the government safety
organization or the corresponding authority for your country.
• If you have any further questions that have not been considered in these
operating instructions, please contact us or any other expert.
G
Operating Instructions
9 Fold Power Strip
Item no. 1210387
Intended use
The power strip has a total of 9 sockets to which appropriate consumers can be con-
nected. All sockets can be jointly switched on or off via an illuminated on /off switch.
The power strip must be connected to a protective contact power socket. The supply
voltage must amount to 230 V/AC, 50 Hz. The total power consumption of all connected
consumers must not exceed 3680 W.
The product may only be used in dry, closed indoor spaces.
The safety instructions of these operating instructions must be followed without fail.
Please read the instruction manual carefully. Keep in a safe place and pass it onto
other users of the power strip.
Any other than the intended use described above might result in product damage and
furthermore cause hazards such as electric shock. The product as a whole must not
be modified or altered!
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Power strip
• Operating instructions
Symbols and markings
The symbol with a flash in a triangle indicates health risks e.g. due to electric
shock.
This symbol informs you about specific risks when handling, operating or
using the product.
The “arrow” symbol indicates special remarks and notes for operation.
The product is intended for use only in indoor dry spaces, it may not become
moist or wet.
Follow the user manual!
Safety instructions
In case of damage caused by non-observance of these operating instruc-
tions, the warranty gets void! We are not liable for any consequential dam-
age!
We are not liable for property damage or injuries caused by improper use
or non-observance of safety instructions! Such circumstances will void the
warranty!
a) General
• Unauthorized modifications and/or alterations to the product are not per-
mitted due to safety and approval reasons (CE). Do not open/dismantle it!
The inside parts do not need adjusting or maintenance by you.
Maintenance, adjustment or repair works may only be carried out by a
professional/specialist workshop who is familiar with the associated dan-
gers or relevant provisions.
• The product features a class I design. It may only be connected to and
operated by a socket with protective earth contact.
The mains outlet must be located near to the product and be easily acces-
sible.
• The power strip is equipped with a child safety device. The child safety
mechanism will only release the socket openings, if the pins of a plug are
inserted simultaneously into both openings.
