Safety
If the equipment is used in a manner not specified by Renishaw, the protection provided by the equipment may be impaired.
There are no user serviceable parts inside the equipment.
The UCC MMI-2 controller is only warranted and approved for use with the provided PSU.
The UCC MMI-2 is isolated from ac power by disconnection of the IEC mains connector from the supplied PSU. If any additional means of
isolation is required, it must be specified and fitted by the machine manufacturer or installer of the product. The isolator / disconnection
device must be sited within easy reach of the operator and comply with IEC61010 and any applicable national wiring regulations for the
country of installation.
WARNING:
Earthing of the UCC MMI-2 is required. It is the responsibility of the OEM or installer to apply the earth bonding
scheme provided by Renishaw in this installation guide.
WARNING:
UCC MMI-2 is isolated from ac power by disconnection of the IEC mains connector from the supplied PSU.
Installation requirements
Prior to installation the installer must ensure that the requirements of the machinery directive are achieved by risk assessment and use of the
appropriate harmonised standards (see External Documents for reference).
UCC MMI-2 installation guide
www.renishaw.com
Issued 08 2020
6