Module
Minimum stylus length
Maximum stylus length
Overall reach
Low force (LF)
10 mm (0.39 in)
30 mm (1.18 in)
94 mm (3.70 in)
Standard force (SF)
10 mm (0.39 in)
50 mm (1.97 in)
114 mm (4.49 in)
Medium force (MF)
10 mm (0.39 in)
60 mm (2.36 in)
124 mm (4.88 in)
Extended force (EF)
10 mm (0.39 in)
60 mm (2.36 in)
124 mm (4.88 in)
6-way
10 mm (0.39 in)
30 mm (1.18 in)
98 mm (3.86 in)
EM1
10 mm (0.39 in)
50 mm (1.97 in)
143 mm (5.63 in)
EM2
10 mm (0.39 in)
50 mm (1.97 in)
168 mm (6.61 in)
TP20 installation
Assembling the probe module and stylus
1. Select the probe module with the correct trigger force rating for the application (see 'TP20 module selector' section).
2. Fit the stylus to the probe module, first hand tightening then using the S7 stylus tool (supplied) for final tightness. Renishaw GF styli
require an S20 spanner. The recommended tightening torque is 0.05 Nm to 0.15 Nm (0.04 lb ft to 0.11 lb ft). Torque must not exceed 0.3
Nm (0.22 lb ft).
RTP20 user's guide
www.renishaw.com
Issued 07 2019
16
