2.3
RMP600 basics
Probe modes
The RMP600 probe can be in one of three modes:
Standby mode
–
Probe is waiting for a switch-on signal.
NOTE:
The RMP600 will enter
“hibernation mode”
should the system interface be powered off or out
of range for a period of 30 seconds (
“hibernation mode”
is only applicable to “
radio on mode
”).
Operational mode
–
When activated by one of the switch-on methods, the probe is switched on and
ready for use.
Configuration mode –
Ready to change the probe settings using Trigger Logic.
Configurable settings
Switch-on / switch-off methods
The following switch-on / switch-off options are user-configurable.
•
Radio on / Radio off
•
Radio on / Timer off
•
Spin on / Spin off
•
Spin on / Timer off
•
Shank switch on / Shank switch off
