1.4
Bef
ore y
ou begin
Information to the equipment installer
All Renishaw equipment is designed to comply with the relevant EU and FCC regulatory requirements.
It is the responsibility of the equipment installer to ensure that the following guidelines are adhered to,
in order for the product to function in accordance with these regulations:
•
any interface MUST be installed in a position away from any potential sources of electrical noise,
(for example power transformers, servo drives):
•
all 0 V/ground connections should be connected to the machine “star point” (the “star point” is a
single point return for all equipment ground and screen cables)
.
This is very important and failure to
adhere to this can cause a potential difference between grounds;
•
all screens must be connected as outlined in the user instructions;
•
cables must not be routed alongside high current sources (for example, motor power supply
cables), or be near high-speed data lines;
•
cable lengths should always be kept to a minimum.
Equipment operation
If this equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
