System description
Product
Description
PH10M-iQ PLUS
A shank-mounted head with multiwired probe capability, a Renishaw
autojoint and inferred qualification
HCU2
A hand control unit for use with PH10 measurement systems
PHC10-3 PLUS
A controller for use with PH10 measurement systems
UCC T3 PLUS
Renishaw CMM controller with integrated PH10 PLUS controller
UCC S3
Renishaw CMM controller with integrated PH10 PLUS controller
The PH10M-iQ PLUS is a general purpose, versatile unit designed specifically for use on direct computer controlled (DCC) CMMs and
incorporates the following features:
720 indexing positions
0.4 μm indexing repeatability
7.5° indexing steps in both axes
300 mm extension bar capability *
Inferred qualification when mounted vertically or horizontally **
* NOTE:
450 mm extension bar capability with special order carbon fibre extensions.
** The inferred calibration procedure is different depending on the chosen orientation of the head.
WARNING:
The components of the PH10M-iQ PLUS system are not compatible with PH9 and PH20 system components. No
attempt should be made to connect the PH10M-iQ PLUS system components to a PH9 or PH20 system as this will result in damage
to the product.
NOTE:
On initial set-up of a PH10M-iQ PLUS system, a head localisation is required. Please refer to the software providers'
documentation for more information.
Specification
Repeatability of position (at a distance of 100 mm)
<0.4 μm TP6A and stylus
Accuracy of step spacing from theoretical position
±0.3 mm TP6A probe and stylus
PH10M-iQ PLUS installation and user's guide
www.renishaw.com
Issued 07 2021
13
