Hardware configuration of the SPA2
23
NOTE:
The motor connection card must be inserted into the
SPA
2
until its mounting plate is in contact
with the rear panel of the
SPA
2
.
6. Using the screws and washers removed in step 3, fix the motor connection card to the
SPA
2
rear
panel.
7. Repeat steps 3 through 6 until all required motor connections are fitted to the
SPA
2
.
8. If an encoder interface card is to be fitted please proceed to section 4.2, if a 4th axis interface card is
to be fitted please proceed to section 4.3, otherwise the unit can now be installed.
Summary of Contents for apply innovation SPA2
