Renfert Millo, Instruction Manual

Page: 16 / 148

- 2 - EN
Operating instructions
1. Setting up and installation
1.1 Setting up
• Place the unit on a stable, flat work -
bench.
• Position the unit so that the mains plug is
easily accessible.
1.2 Electrical connection
• Ensure that the voltage corresponds to
the voltage on the rating plate of the unit.
• Plug in the unit.
1.3 Connecting the extractor
The Millo / Millo pro must be
operated with an extractor.
T he minimum air flow volume of
the extractor must be 2040 l/h.
• Attach the extractor hose to the connec-
tor on the unit (Fig. 6).
1.3.1 M
illo pro
The Millo pro has a plug-in socket.
This plug-in socket has an electrical cur-
rent when the Millo pro is switched on so
that an extractor can be operated directly
with it.
Do not exceed the connected
load for the plug-in socket.
The plug-in socket should only
be used for connecting an ex-
tractor.
Connecting other electrical units
to the plug-in socket could dam-
age the Millo pro.
• Plug the extractor into the plug-in socket
on the back of the Millo pro (Fig. 7).
Section D.1 at the end of these instruc-
tions offers information concerning electri-
cal systems employing different power
plug designs.
The Millo / Millo pro is now ready for
operation.
Information for the purchaser
Instruct operators on the appli-
cation, possible hazards during
use and operation of the Millo /
Millo pro arch trimmer based on
the user information.
Ensure that this user information is avail-
able to operators.
Further information is included in the sec-
tion:
“Information for the purchaser“
at the end of these instructions.